How To Remove Baseboard Nails From Drywall

Disclosure: We may get commissions for purchases made through links in this post.

Brad nails are thinner and more than delicate than other nails, making them perfect for areas where you don't want a large, noticeable hole left past a wide nail. But sometimes you lot even so might take to pull them out later - which can be more difficult since they are so small and hard to get a good grip on. This is peculiarly truthful if you're working with a more delicate surface. For instance, how do you remove brad nails from drywall, without putting a hole in the wall? Nosotros've brought you the answer.

You can utilise any good pry tool for removing a brad smash, just like any other nail. The claw terminate of a hammer, a pry bar, or pliers are all suitable choices for getting a grip on the nail. The virtually of import part of removing a brad nail is covering the drywall to protect information technology before you start. Use a thin slice of wood or a putty pocketknife.

Keep reading as we explain exactly how to use a putty knife to protect the wall - we'll even give you a helpful video that demonstrates the procedure. And then, nosotros'll cover how to selection the right tool. We'll offer some pointers on what to do if the boom is really, really stuck. Finally, we'll show you one last tool that works in the accented worst-instance situations - even when the nail has no head or you have to pull it out backward.

View of a male construction worker using a nail puller on timber, How To Remove Brad Nails From Drywall

How To Remove Brad Nails From Drywall

Removing brad nails from drywall is, more or less, the same equally pulling out any other nail. The head is a bit smaller, and so you demand to get a expert grip on the smash with whatever tool you use.

The real trouble isn't pulling the nail - it's not bashing a hole through the drywall when you do it! Yous need to protect the drywall before you beginning yanking on the nail.

Do this by putting a thin slice of wood or a putty knife downwardly. So, you can employ the tool of your choice to grip the blast. Use the putty knife to baby-sit the surface every bit you rock the tool dorsum and along for leverage.

Watch this video to see how it'south done:

What Tool Is Used To Remove Brad Nails?

There are three tools that can be effectively used to remove brad nails. They are:

Pliers
Pry bar
Hammer

Manifestly, the hammer works in the traditional way - using the claw to pull out the nail. This isn't the easiest or ideal method though. The head of a brad nail is then small, there'due south very piffling to grip.

The pry bar is a bit easier. However, it still has the same effect as the hammer. At that place'south not a lot of head for the pry bar to get much leverage. Also, it can be like shooting fish in a barrel to scuff or damage the forest if you aren't careful. Always protect the surface and don't use as well much strength.

Many carpenters find a pair of pliers to be the all-time method for removing a brad blast. Simply grab the nail, clamp down, and yank it out.

Read more here: How To Remove Brad Nails From Baseboards

How Do You Remove A Nail That Is Stuck?

There are several methods and tools for getting a stuck blast out. Some of them are obvious, like pulling with a hammer. Just some might take a trivial know-how, requiring a technique or a tool familiar to experts.

There'southward no reason to waste matter time on the simple methods, simply here are a few methods that offer a lot of success that a non-expert might not have heard of earlier.

Sideways Leverage

A hammer isn't the virtually powerful fashion to remove a stuck smash. But for most people, it's what they showtime with. Afterwards all, it'due south the tool already in your hand when you're driving in a nail.

Employ the hook end of the hammer to take hold of the nail head. Then, rather than pulling direct out, rock the hammer sideways, letting the hammer claw pivot sideways. This maximizes the power of your pull, without breaking the nail or hurting your arm.

Be sure to work carefully - it'southward easy to go out a scuff, ding, or dent behind. If this surface needs to remain presentable, sideslip a slice of forest downwardly equally a buffer earlier you get-go twisting and pulling the hammer around.

Pry The Nail Out

A pry bar can also help get the toughest nail out, fifty-fifty ane cached deep. The best pry tool for the job is called a cat's hand. It offers strength and leverage without requiring much brute force.

Of course, y'all still need to work carefully. Protect the surface, and put a sparse piece of wood downwardly before you start yanking.

A cat's paw but like this ane is used for demolition jobs and in carpentry. It's so popular because it works!

Click here to come across this true cat's paw on Amazon.

Cut The Nail

If you really can't get the nail out, maybe the best pick is don't - just leave information technology in. Utilize a reciprocating saw to cut the blast instead. If you lot have a gentle touch, you can even avoid mark the woods.

Simply be sure to hold the saw firmly. Chances are y'all'll be reaching into tight spots, which tends to pinch the blade. Exist rubber, work carefully, and hold the saw guard confronting the wood.

According to Family Handyman, it's all-time to use a blade with 10 teeth per inch. This kind of blade can cut through even the toughest screws.

Click here to see this saw bract on Amazon.

Use A Pin Punch To Deep Set The Nail

If yous can leave the nail in, try pushing it further out of sight. Use a pin punch or nail set up to drive the nail below the surface, making it less noticeable. On sparse pieces of woods, like trim, you might exist able to push the nail all the fashion through and pull it out the other side.

Click here to see this nail set on Amazon.

How Do Y'all Remove A Nail Without A Head?

Many of the tricks and tools already mentioned for removing a stuck nail can also be successful on a nail with no head. Only ane last tool, peculiarly useful for removing a headless nail, is this 1: the nail puller.

Not just tin can information technology grip a blast with no head, just information technology also functions as a nail cutter. Considering realistically, sometimes the whole nail doesn't need to exist removed. Sometimes, leaving the blast buried and just taking the head off is really the best action.

Y'all can also use it to pull from the behind of the smash, like when removing nails from a slice of trim. This keeps the front intact, rather than trying to push a nail back out from the face of the trim.

No thing which arroyo you take, this tool will let yous get the job done.

Click here to see this nail puller on Amazon.

Which Is Ameliorate: Brad Nail Or Finishing Boom?

Different nails are suited for different jobs - that's why there are and so many kinds of nails at the hardware store, after all. Some of them take their use right in the name - roofing nails, for example.

Finishing nails have a small head which makes them ideal for places where a thin, discrete nail is important. Considering they're a bit thicker than brad nails, they work when you demand a strong nail with a small head that blends in - think article of furniture or cabinets.

Brad nails are a bit more than slender, effectually 18 estimate. They exit smaller holes, which are less likely to dissever very delicate woods. Small-scale, sparse pieces of trim or molding are an platonic place to use brad nails. Too, because of the small-scale head, there'southward less patching to do to cover ugly smash holes.

If you've decided to use brad nails, the adjacent question earlier you outset working is: What Size Brad Nails Practice I Demand? [By Type Of Projection]

In Closing

View of a male construction worker using a nail puller on timber, How To Remove Brad Nails From Drywall

You can use the claw cease of a hammer, a "cat's paw" pry bar, or just a pair of pliers to yank brad nails out with relative ease. Getting them out isn't the hard part - it'southward not damaging the surface while you lot do information technology. To go along from scuffing or, fifty-fifty worse, leaving a hole, always protect the expanse with a thin slice of wood or a putty knife. Then, yous tin lever the nail out without ever letting the tool scrape the surface.

If yous have a lot of nails to pull, information technology might exist worthwhile to invest in a special blast puller. This grips nails tightly, letting you pull from any side, and can even become a concur on nails without a head.